Skip to main content
Submitted by kikep on Thu, 03/22/2018 - 13:32

How to config the inputs and outputs for DB-28040 to read signal coming and active the outputs to just , how i can config for example pin40 is input 1 and pin 41 is output1 , hope can help me pls.

thanks
enrique

Comments 1

andriys on 03/22/2018 - 14:56

Hello Enrique,
I/O points on DB-28040 can be configured in banks of 8 with CO command.
Be aware that there were hardware changes between different revisions of DB-28040.
For more information, please see CO command in command reference, chapter 13 DB-28040 of the DMC-21x3 Accessories manual, and application note #1253 on changes in the hardware.
Thank you,
Andriy Stasyuk
Applications Engineer
Galil Motion Control