Skip to main content

CDS-3310

Ethernet/RS232 1-axis Motion Controller and Drive

The CDS-3310 is a single-axis controller and drive system for precisely controlling a brush or brushless servo motor. It combines a high-performance, programmable motion controller with a 500W PWM drive in a compact, cost-effective package. The CDS-3310 provides a 10/100 Base-T Ethernet port and up to eight individual CDS-3310 units may be connected on a distributed network and programmed as a single controller. The communication burden is minimized because the host PC only has to talk with the master CDS-3310, which in turn communicates with the other CDS-3310 on the network.

The CDS-3310 incorporates a 32-bit microcomputer and provides such advanced features as PID compensation with velocity and acceleration feedforward, program memory with multitasking for simultaneously running up to eight programs, and uncommitted I/O for synchronizing motion with external events. Modes of motion include point-to-point positioning, jogging, contouring, electronic gearing and ECAM.

Like all Galil controllers, CDS-3310 programming is simplified with two-letter, intuitive commands and a full set of software tools for servo tuning and analysis.

Features
  • For new applications, Galil recommends the new generation DMC-3x01x series single-axis controllers.
  • 1-axis motion controller with on-board PWM drive for brush or brushless servo motor; 18-72V input, 7A cont. drive
  • Ethernet 10/100 Base-T and (1) 19.2kb RS232 port; USB option
  • Distributed control allows connection of up to 8 CDS-3310 units on an Ethernet network
  • Ethernet supports multiple masters and multiple slaves. TCP/IP, UDP and ModBus TCP master protocol for communication with I/O devices
  • Accepts encoder feedback up to 12 MHz
  • PID compensation with velocity and accceleration feedforward, integration limits, notch filter and low-pass filter
  • Modes of motion: jogging, point-to-point positioning, contouring, electronic gearing and ECAM
  • Multitasking for concurrent execution of up to eight application programs
  • Non-volatile memory for application programs, variables and arrays
  • Dual encoder, home input and forward and reverse limits
  • 8 TTL uncommitted inputs and 10 TTL outputs
  • 2 uncommitted analog inputs (0-5V) and 1 analog output (+/-10V)
  • Add 8 analog inputs and 40 digital I/O with optional DB-28040
  • Brake drive output 24V, 0.5A
  • High speed position latch and output compare
  • Small size: 5.15" x 8.25" metal enclosure; DIN-Rail mount clip available
  • ICM-3300 interconnect module provides screw terminals and optical isolation of I/O
  • On-board DC-to-DC converter for single 18V to 72V DC input
  • Communication drivers for Windows, QNX, and Linux
  • Custom hardware and firmware options available
Part Number Description 1 pc 100 pc
Ethernet 1-axis w/ 500W servo drive $940 $640
Digital and Analog I/O Board $310 $205
I/O Board with 5V outputs $310 $205
Interconnect module for CDS-3310 $250 $150
shunt regulator for CDS-3310 $79 $42

Note: Pricing shown is for domestic purchases only.

Image Part Number Description
15-pin HD male D to discrete wires-1 meter
15-pin HD male D to discrete wires-2 meter
16-bit analog-to-digital