gclib  370
Communications API for Galil controllers and PLCs
 All Data Structures Files Functions Variables Typedefs Macros Pages
Ubuntu Linux

Tested versions

This version of Linux has x64/AMD64 Support Only. Contact Galil if another version is required for an application.

See the installation page for supported versions.

Installation

Create a temporary variable for Ubuntu version

$ uver=$(lsb_release -r | cut -f 2); echo $uver
16.04

Install Galil's public certificate

$ wget http://www.galil.com/sw/pub/ubuntu/$uver/GALIL-PUB-KEY
# apt-key add GALIL-PUB-KEY

Get Galil's apt sources list

# wget http://www.galil.com/sw/pub/ubuntu/$uver/galil.list -O /etc/apt/sources.list.d/galil.list
# apt-get update

Install Package

Install gclib

 # apt-get install gclib

Install gcaps on 16.04 and better (optional)

Following Linux's daemon naming conventions, gcaps is called gcapsd on Ubuntu. See the gcaps documentation for more information.

# apt-get install gcapsd

Verify that the systemd unit is running.

$ systemctl is-active gcapsd
active

Uninstall Package

If the packages need to be removed from the system, the following commands may be used.

Uninstall gclib

# apt-get remove gclib

Uninstall gcaps

# apt-get remove gcapsd

Serial Ports and USB

If access to the serial ports or USB (e.g. DMC-4103) is desired through gclib, the following will provide steps to join the correct access group. If using USB, be sure the controller is powered and the usb is plugged in before beginning.

Determine group with access

$ ls -l /dev/ttyUSB* /dev/ttyS*
crw-rw----. 1 root dialout   4, 64 Mar  3 16:39 /dev/ttyS0
crw-rw----. 1 root dialout   4, 65 Mar  3 16:39 /dev/ttyS1
crw-rw----. 1 root dialout   4, 66 Mar  3 16:39 /dev/ttyS2
crw-rw----. 1 root dialout   4, 67 Mar  3 16:39 /dev/ttyS3
crw-rw----. 1 root dialout 188,  0 Mar  6 11:08 /dev/ttyUSB0

In the above listing, dialout is the group that needs to be joined. uucp is another common group that may be listed.

Add the desired username to the group.

$ sudo gpasswd -a username dialout
[sudo] password for username: 
Adding user username to group dialout

Log out and back in for change to take effect.

$ groups
username wheel dialout

gclib can now connect to serial and usb devices from user username.

PCI Controllers

If using a Galil PCI controller, the PCI driver must be installed.

Extract source and build driver

$ tar -xf /usr/share/doc/gclib/src/gclib_pci.tar.gz
$ make

Copy module and add to kernel

$ sudo cp galilpci.ko /lib/modules/$(uname -r)
$ sudo depmod
$ sudo modprobe galilpci

Add galil group for access to PCI

$ sudo groupadd -f -K GID_MIN=100 -K GID_MAX=499 galil
$ sudo cp 90-galilpci.rules /etc/udev/rules.d/
$ sudo udevadm control --reload-rules
$ sudo udevadm trigger
$ sudo usermod -a -G galil username  #exchange "username" with actual user's name

Logout and back in. The PCI hardware is now available for access.

$ ls -l /dev/galil*
crw-rw---- 1 root galil 10, 56 Jun  9 11:07 /dev/galilpci0
$ echo -e "\x12\x16\r" > /dev/galilpci0
$ cat /dev/galilpci0 
DMC1846 Rev 1.1a
:

Documentation

The documentation is left as a tarball to minimize disk usage. The latest release version of the user manual is available at the following link.

Offline html

The following allows viewing of the html docs from the installation.

$ tar -xzf /usr/share/doc/gclib/gclib_doc.tar.gz html
$ firefox html/index.html

Offline pdf

There may be a pdf shipped in the package. The following allows viewing of the pdf docs from the installation.

$ tar -xzf /usr/share/doc/gclib/gclib_doc.tar.gz gclib_132.pdf
$ evince gclib.pdf