Motion Controllers

Galil leverages decades of experience and technological innovation to provide motion controllers for customers across a wide range of industries. Our full product offering allows you to select the best motion controller for your specific application. Choose from single-axis or multi-axis, bus-based or stand-alone, box-level or card-level, and external drives or integrated drives. All of Galil’s motion controllers and drives are backed by a fully trained application engineering team.  If our standard motion controllers don't meet your requirements we will cost-effectively make one that does.  Our description of motion controller customizations will give you examples of modifications we have made to meet our customers motion requirements.

Multi-axis Controllers

DMC-4000 motion controller
Ethernet/RS232 Multi-Axis Motion Controllers, 1-8 axes
DMC-41x3 motion control card
Ethernet/RS232 Econo Motion Controllers, 1-8 axes
DMC-52320 EtherCAT Master Motor Controller
EtherCAT Master Multi-Axis Motion Controllers, 2, 4, 8, 16, or 32 axes
DMC-50080 EtherCAT Master Motor Controller
EtherCAT Master Multi-Axis Motion Controllers, 1-8 axes EtherCAT/1-4 axes Local
DMC-4200 motion controller
Ethernet/RS232 Multi-Axis Motion Controller, 1-8 axes, DMC-40x0 Performance with DMC-2xx0 Connectivity
DMC-1886 PCI motor controller
PCI Multi-Axis Controllers, 1-8 axes
Ethernet/RS232 Econo Motion Controllers, 1-8 axes
PCI Econo Motion Controllers, 1-4 axes

Single-axis Controllers

DMC-30000 motor control
Ethernet/RS232 Single Axis Motion Controller

Prior Generation Motion Controllers

Single and Dual-Axis Motion Controllers With Ethernet/RS232
ISA Optima Motion Controllers, 1-8 axes
Ethernet/RS232 Optima Motion Controllers, 1-8 axes
Ethernet/RS232 1-axis Motion Controller and Drive
PC/104 1-Axis Motion Controller
PCI Optima Motion Controllers, 1-8 axes
PCI 1-Axis Motion Controller
RS232/ISA Legacy Series 1-8 axis

Estimated End-Of-Life for Controllers - updated Jan 2017


These motion controllers and PLCs are still in production and will end-of-life in the number of years specified in the table below.

Controller Introduced Estimated End-of-Life New Equivalent
DMC-10x0 October 1992 1 to 3 years DMC-18x6
DMC-12x0 September 1998 Discontinued in 2017 No PC/104. Contact Factory.
DMC-1411 November 1996 1 to 4 years DMC-30010
DMC-14x5 October 1999 5 or more years DMC-30010
DMC-1417 May 2001 1 to 4 years DMC-30010
DMC-15x0 October 1994 1 to 3 Years DMC-41x3
DMC-17x0 November 1997 1 to 3 Years DMC-18x6
DMC-18x0 March 1999 3 to 6 years DMC-18x6
DMC-22x0 September 1998 3 to 5 years DMC-42x0
CDS-3310 October 2004 2 to 4 Years DMC-30012
IOC-7007 January 2002 Discontinued in 2016 RIO series

Obsolete Products List